
1/6 Iron Scavenger figure with flight stand
I have been approached to make this. Since it was on my personal Wishlist as well, Jazzinc Dioramas will produce the Iron Scavenger in 1/6 scale in very limited numbers.
It is fully painted and weathered, with light-up features and a flight stand.
If you placed your order in 2021 and 2022, your order will ship in April 2022. We do not currently have these products in our warehouse. We’re working to complete the second batch.
12 inch Iron Scavenger figure with:
-Over 40 points of articulation
-Helmet with green light up eyes
-Over 4 ft wingspan
-Real fabric outfit
-Jacket with fur collar
-Boots with talons
-Exoskeleton
-Turbines
-Dynamic stand with base and flexible metal pose-able rod
-Fully painted and movie accurate
Here is update #5 on the progress:

1/6 Justice Vehicle DeLuxe Version
SHOWN WITH OPTIONAL DIORAMA BASE!
Since it was on my personal wishlist as well, Jazzinc Dioramas Collectibles Community Collective will make our Justice Vehicle to order in very limited numbers.
The Justice Vehicle will be fully painted and weathered, with a cockpit and opening doors. The Deluxe Version adds Rubber Tires, Rotating Tires, Poseable steering front wheels, Suspension action on springs, light up features and a limited edition plate. It will be shipped in a custom box with custom fitted styrofoam.

1/6 1966 Bat-Mobile Collectible Vehicle for Batman and Robin TV-Series – Ultimate DX version
We are very proud to offer the first and only Limited Edition officially licensed Bat-Mobile from the classic 1966 tv series in 1/6 scale. This is the DX version, which means it will have light-up features with remote control and more extras (see below). Figures are not included. Batman and Robin figures © Hot Toys Limited, all rights reserved.
Release date for 1st Batch: May 2022 *subsequent batches will ship at later dates, yet to be determined*
*Prototype shown is not final. Pending licensor approval.
**Power supply included for collectible vehicle.
***Power required for LED light up function.
****Product details could be subjected to change without further notice

1/6 Ultimate DX Falcon Cockpit diorama
THE DX VERSION OF Our version of the One Six Scale Millennium Falcon Cockpit 1/6 Diorama, It would work for scenes from A New Hope, The Force Awakens, the last Jedi and Empire Strikes Back and more!
THE DX VERSION ADDS ALMOST 300 LEDS AND AN FX OPTION
Size: 74 cm in length, 47cm in diameter and 53cm in height with stand

1/6 Ultimate DX Snowspeeder Diorama Set for Hot Toys and Sideshow Luke Skywalker
*** PLEASE NOTE THE FINAL PRODUCT WILL BE FULLY PAINTED AND WEATHERED***
Included:
- A Snowspeeder in full 1/6 scale,
- Opening Canopy
- Detailed cockpit,
- Room for two 1/6 hot toys or sideshow figures
- light up features in the cockpit
- clear perspex stand
- landing skids
SIZE:
Based on the actual prop measurements. In 1/6 scale it will be 33,7 inches wide, 37,29 inches long and 13,5 inches high.

1/6 Ultimate DX Sand Speeder Diorama Set for Hot Toys Rey Episode VII
*** PLEASE NOTE THE FINAL PRODUCT WILL BE FULLY PAINTED AND WEATHERED***
Rey’s Speeder has been much requested and not surprisingly so of course. The Hot Toys figures from Episode VII really are a great complement to this vehicle. The Ultimate DX version adds the actual net with all the spare parts she picks up in the beginning of the movie. The base will be upgraded to a sand diorama base.
Release of 1st batch: April 30, 2022 (subsequent batches to ship at later dates, yet to be determined)
SIZE:
Based on the actual prop measurements. In 1/6 scale it will be 61 cm or 24 inches long and 35 cm or 14 inches high (including stand) and 13,3 or 5 ¼ inches wide.

1/6 Vehicle – Optional Upgrade kit ‘The League’
Here is the much requested JL upgrade kit. Compatible with both our base and deluxe version. It will be shipped in a custom box with custom fitted styrofoam together with the other BvS and JL orders.

1/6 1966 VEHICLE – Base version
We are very proud to offer the first and only Limited Edition officially licensed Bat-Mobile from the classic 1966 tv series in 1/6 scale. This is the Base version, which means it will NOT have light-up features and extras. For that, please order the Ultimate DX version. Figures are not included. Batman and Robin figures © Hot Toys Limited, all rights reserved.
Release date for 1st Batch: May 2022 *subsequent batches to be released at later dates, yet to be determined*
*Prototype shown is not final. Pending licensor approval.
**Product details could be subjected to change without further notice
This is the Jazzinc Collectibles Collective community project to recreate the Limited Edition 1966 Bat-Mobile Collectible Vehicle in the most accurate detail possible. This base version features a fully painted and assembled 1966 mobile with chrome parts, opening doors, rubber tires, and pose-able front wheels. If you want the no-compromise version with lights and much more, please order the Ultimate DX version here.

1/6 scale Ultimate 1989 Bat Wing vehicle with opening cockpit
Batman figures © Hot Toys Limited, all rights reserved.
Release date: end of December 2022
*Prototype shown is not final. Pending licensor approval.
**Batteries included for collectible vehicle.
***Power required for LED light up function.
****Product details could be subjected to change without further notice

1/6 1995 Batman Forever Bat-Mobile Collectible Vehicle – Ultimate DX
As with everything, we let our members in the closed Facebook group decide our next project and the majority chose for us to do the 1995 Batman Forever Batmobile. We are very proud to offer the first and only Limited Edition officially licensed Bat-Mobile from the 1995 movie in 1/6 scale. The DX version is the only version we will do. This means it will have light-up features, which we consider to be essential to this design. Figures are not included. Batman and Robin figures © Hot Toys Limited, all rights reserved.
Release date: Approximately sometime in the first half of 2023
*Prototype shown is not final. Pending licensor approval.
**Power supply included for collectible vehicle.
***Power required for LED light up function.
****Product details could be subjected to change without further notice

1/6 Ultimate X34 Landspeeder Diorama – Second run
***With so many people wanting to be wait listed, we got one more run together. Ready to ship now!***
Thank you to Jared Bunnell for the awesome pictures!
Luke’s Landspeeder has been much requested and not surprisingly so of course. The Hot Toys figures from a New Hope really are a great complement to this vehicle.
SIZE:
Based on the actual prop measurements. In 1/6 scale it will be 71 cm or 28 inches long and 38 cm or 15 inches wide!
IN STOCK AND READY TO SHIP
COMES FULLY PAINTED AND ASSEMBLED

1/6 Ultimate DX Batman BvS Cave Computer Lab from Batman v Superman (2016)
Figures are not included. Batman figures © Hot Toys Limited, all rights reserved.
Release date: estimated at end of September 2022
*Prototype shown is not final. Pending licensor approval.
**Power supply included for collectible vehicle.
***Power required for LED light up function.
****Product details could be subjected to change without further notice

1/6 TruScale Falcon Main Cargo Hold diorama for Ikea Besta, Stuva or Stand Alone – Second run
Our version of the One Six Scale Main Cargo Hold Millennium Falcon 1/6 Diorama, suitable for Ikea Besta/Stuva (so around 22 inches wide, and variable depth for Besta and Stuva, Height is a sloping line around 14 inches). It would work for scenes from A New Hope, The Force Awakens, the last Jedi and Empire Strikes Back and more!

1/6 Hoth Rebel Base Hallway Detolf Deluxe diorama for Hot Toys Princess Leia, Han Solo, Snowtroopers and more – Second run
Be ready for the Star Wars Empire Strikes Back Figures Hot Toys for our 1/6 Hoth Rebel Base Hallway Detolf Deluxe diorama for Hot Toys Princess Leia, Han Solo, Snowtroopers and more

1/6 Death Star Diorama – Deluxe Detolf V3
“We meet again, at last. The circle is now complete. When I left you I was but the learner. Now, *I* am the master.”
Pre-order our redesigned Death Star deluxe diorama v3 for 1/6 scale for Ikea Detolf or stand-alone presentation. Add a museum-grade diorama to your collection to lend an authentic and realistic air to your setup.
Product shipping in very small batches on a weekly basis (about 7 per week), starting in January 2022. If you’ve paid in full but have not yet received a shipping charge invoice, please be patient. Your turn will come.

1/6 TruScale Main Cargo Hold diorama for Ikea Besta, Stuva or Stand Alone
Our version of the One Six Scale Main Cargo Hold Millennium Falcon 1/6 Diorama, suitable for Ikea Besta/Stuva (so around 22 inches wide, and variable depth for Besta and Stuva, Height is a sloping line around 14 inches). It would work for scenes from A New Hope, The Force Awakens, the last Jedi and Empire Strikes Back and more! The more I think about it, the more I want to make this modular, with floor pieces that fit together so you can expand. Several wall pieces and a separate bench seat so you could expand and arrange as fits your display space.

1/6 ULTIMATE DX EXTENSION SET for TruScale Falcon Main Cargo Hold diorama
THIS DX EXTENSION KIT CONTAINS EVERYTHING IN SQUARE 2 PLUS THE DX SQUARE (see product gallery)
The extension kit completes our version of the One Six Scale Main Cargo Hold Falcon 1/6 Diorama, . It would work for scenes from A New Hope, The Force Awakens, the last Jedi and Empire Strikes Back and more!
PLEASE READ THIS CAREFULLY. TO COMPLETE EVERYTHING IN THE PICTURES, YOU MUST ALSO ORDER OR OWN:
We have placed our Cockpit diorama behind the rear wall for effect. The rear wall will be supplied with a falcon hallway graphic cardboard print.
Release date: estimated at the end of August 2022

1/6 Darth Vader Meditation Chamber diorama ULTIMATE – Second run
Recreate the classic scenes from The Empire Strikes Back with your Sideshow or Hot Toys Darth Vader inside his meditation pod. Final environment to be determined. The 3D image shows the entire model, but much of that will have to be cut out to make it a manageable diorama in 1/6 scale. Perfect for HOT TOYS MMS 452 DARTH VADER, EMPIRE STRIKES BACK.
Release date: 1st batch estimated in end of March 2022

1/6 EXTENSION KIT for TruScale Falcon Main Cargo Hold diorama for Ikea Besta, Stuva or Stand Alone
THIS EXTENSION KIT CONTAINS EVERYTHING IN SQUARE 2 SHOWN IN THE FINAL IMAGE OF THE PRODUCT GALLERY.
The extension kit completes our version of the One Six Scale Main Cargo Hold Falcon 1/6 Diorama, suitable for Ikea Besta/Stuva (so around 22 inches wide, and variable depth for Besta and Stuva, Height is a sloping line around 18 inches). It would work for scenes from A New Hope, The Force Awakens, the last Jedi and Empire Strikes Back and more!
IF YOU WANT TO UPGRADE TO THE FULL ULTIMATE DX EXTENSION OF THE MAIN CARGO HOLD, PLEASE ORDER THAT HERE: https://jazzincdioramas.com/product/1-6-dx-extension-kit-for-truscale-falcon-main-cargo-hold-diorama/
Release date: estimated at the end of August 2022

1/6 Tatooine and Jakku Moisture Vaporator with modular design and display options
This has been a popular demand for a long time and we are ready for pre-orders. This modular design will allow for many different configurations and display options, as can be seen in the rendering. GREAT FOR MANY STAR WARS FIGURES AND THE MANDALORIAN!
MINIMUM CONFIGURATION SIZE: 16 1/8 INCH BY 4 ⅓ (41 X 11 CM)
MAXIMUM CONFIGURATION SIZE: 37 3/4 INCH X 11 13/16 in (96 X 30 CM)
Release date: 1st batch estimated to ship in late March 2022

1/6 Ultimate Falcon Cockpit diorama
Our version of the One Six Scale Falcon Cockpit 1/6 Diorama. It would work for scenes from A New Hope, The Force Awakens, the last Jedi and Empire Strikes Back and more!
Size: 74 cm in length, 47cm in diameter and 53cm in height with stand

1/6 Tantive IV Rebel Blockade Runner Entry Way Diorama 45cm – TruScale DX
First come, first serve. These are not coming back. This is the 45 cm deep version. Check your display space. We also offer a 35 cm deep version.
Bring the classic openings scene home with this Tantive IV Rebel Blockade Runner diorama. Designed to fit inside you Ikea Stuva or stand alone you can place your Darth Vader and Storm Troopers, or your Rebel Fleet Troopers with Captain Antilles or your two favourite Droids!
Airbrush blast marks on back wall as seen in the main product image are only available as special request at a $30 upcharge!

1/6 scale Falcon Cargo Hold Daego Sleep Bunk Accessory – Truscale
“It’s not wise to upset a Wookiee.”
We have gotten so many requests to make full tru-scale 1/6 scale Falcon Cargo Hold Daego Sleep Bunk Accessory – Truscale. Well, here you go. Pre-order our 1/6 scale Falcon Cargo Hold Daego Sleep Bunk Accessory – Truscale presentation and upgrade your Falcon Cargo Hold Diorama, or use it as a stand-alone piece. Add a museum-grade diorama to your collection to lend an authentic and realistic air to your setup.

1/6 Death Star Diorama – Deluxe Detolf V2
Death Star deluxe diorama for 1/6 scale for Ikea Detolf or stand-alone presentation

1/6 scale Batmobile from The Batman (2022)- Limited Signature Edition – Weathered Version
“I’m vengeance.”
Introducing the Limited and Numbered Batmobile Signature Edition from 2022’s The Batman, a powerful iteration of the Dark Knight ride that’s unlike anything we’ve seen before. And just like the titular hero himself, the 2022 Batmobile is also menacing, intimidating and muscular. Almost immediately upon the film’s release, The Batman car definitely qualified as a truly iconic vehicle worthy of awe and appreciation, if you’re a fan, and fear and trepidation, if you’re a supervillain.
Jazzinc is proud to introduce the officially approved and licensed 2022 Batmobile in Deluxe ⅙ Scale with every detail replicated according to the schematics as specified by director Matt Reeves, built from the files straight from the movie set. From the interior lights, to the V8 engine, to the OMP steering wheel, every aspect is accurate, every detail carefully considered and developed.
This is the WEATHERED VERSION of the 2022 Batmobile. If you’re looking for the clean version, click here.

1/6 Emperor Throne Room – TruScale (without throne) FINAL RUN
AFTER IT HAS BEEN REQUESTED MANY TIMES, WE ARE TRYING ONE FINAL RUN BASED ON THE COMMITMENT COUNT IN THE FACEBOOK GROUP. DON’T LET ME DOWN! ;-)
Be ready for the Star Wars Return of the Jedi Hot Toys Emperor Palpatine MMS467 or MMS468 and recreate the climax from the original trilogy in your TruScale version of the Emperor Throne Room! There is also room for two Royal Guards MMS469, or even better, the Luke Skywalker MMS429 and Darth Vader MMS452 duelling!

1/6 TruScale Sand Speeder Diorama Set for Hot Toys Rey Episode VII
*** PLEASE NOTE THE FINAL PRODUCT WILL BE FULLY PAINTED AND WEATHERED***
Rey’s Speeder has been much requested and not surprisingly so of course. The Hot Toys figures from Episode VII really are a great complement to this vehicle.
Release of 1st batch: March 30, 2022 (subsequent batches to ship at later dates, yet to be determined)
SIZE:
Based on the actual prop measurements. In 1/6 scale it will be 61 cm or 24 inches long and 35 cm or 14 inches high (including stand) and 13,3 or 5 ¼ inches wide.
COMES FULLY PAINTED AND ASSEMBLED

1/6 Tantive IV Rebel Blockade Runner Entry Way – Detolf Deluxe
Make the perfect 1/6 scale setup of the classic opening scene that started it all for us Star Wars fans: the Tantive IV Rebel Blockade Runner Entry Way with this diorama. Designed to fit inside your Ikea Detolf or stand alone you can place your Darth Vader and Storm Troopers, or your Rebel Fleet Troopers with Captain Antilles or your two favourite Droids!

1/6 scale Falcon Corridor Diorama – Deluxe Detolf or Stand Alone
“You’ve never heard of the Millennium Falcon? It’s the ship that made the Kessel run in less than 12 parsecs.”
We have gotten so many requests to make a Falcon themed diorama for Detolf. Well, here you go. Pre-order our 1/6 scale Falcon Corridor Diorama – Deluxe Detolf or Stand Alone presentation. Add a museum-grade diorama to your collection to lend an authentic and realistic air to your setup.

1/6 Hoth Rebel Base Hallway Detolf Deluxe diorama for Hot Toys Princess Leia, Han Solo, Snowtroopers and more
Be ready for the Star Wars Empire Strikes Back Figures Hot Toys for our 1/6 Hoth Rebel Base Hallway Detolf Deluxe diorama for Hot Toys Princess Leia, Han Solo, Snowtroopers and more

1/6 Carbon Freezing Chamber Diorama – TruScale
The first of the dioramas that is designed after it won the vote on Sideshowcollectors.com. The Carbon Freezing Chamber is part of the pivotal scenes at the end of Empire Strikes Back so we wanted to do it justice by designing this on TruScale Scale. Order now, only a few left in stock and no new batch will be made.

1/6 TruScale Bespin Gantry Diorama. I AM YOUR FATHER DIORAMA ENVIRONMENT for Ikea Stuva & Besta
Today marks the start of a new diorama design. I am very excited about it! The Bespin Gantry diorama has been much requested and not surprisingly so of course. The Cloud City Duel is the most iconic scene of all Star Wars movies, the most quoted dialogue, and it is the emotional and dramatic climax of the original trilogy: That duel between Darth Vader and Luke Skywalker on the windy Bespin Gantry where Vader reveals *SPOILER ALERT* that he is Luke’s father… NOOOOOOOOOOOOOOOOOOOO!
SIZE:
Designed to fit the classic Ikea Stuva display cabinet, so the maximum dimensions will be WHD: 60x60x44 cm (or 23.6 x 23.6 x 16.14 inches for you imperialists)

1/6 Truscale Batman BvS Cave Computer Lab from Batman v Superman (2016)
Figures are not included. Batman figures © Hot Toys Limited, all rights reserved.
Release date: estimated at end of September 2022
*Prototype shown is not final. Pending licensor approval.
**Power supply included for collectible vehicle.
***Power required for LED light up function.
****Product details could be subjected to change without further notice

1/6 Tantive IV Rebel Blockade Runner Service Corridor Diorama – Detolf Deluxe
One of my personal favourites, to create the classic image of princess Leia in the Tantive IV Rebel Blockade Runner Service Corridor, hiding the death star plans inside R2-D2. Made for our Small display size to fit inside a Detolf. Made of solid machined and painted Aluminium.

1/6 Death Star Diorama – Budget Detolf V2
This is our most popular model. The Death Star with it’s typical wall patterns and light up feature really adds depth and realism to any Star Wars figure without breaking the bank. It’s the 1/6 BUDGET Detolf Death Star DIORAMA for Hot Toys Sideshow Tarkin & Darth Vader or your favorite droids and Rebels MMS434 MMS418 MMS452

1/6 Death Star Window with Animated 15 inch Display Screen for Detolf – Deluxe
Imagine your Detolf with Hot Toys Governor Tarkin, Princess Leia and/or Darth Vader with our Death Star Window, designed to fit in one of your Detolf Shelves, with an actual screen, displaying the destruction of Alderaan. Or Maybe a Rogue One scene with the destruction of Jedda. Now it is possible with our Death Star Window Detolf Deluxe Diorama. Don’t miss out, and order now.

1/6 Carbon Freezing Chamber Diorama – Detolf Budget
The first of the dioramas that is designed after it won the vote on Sideshowcollectors.com. The Carbon Freezing Chamber is part of the pivotal scenes at the end of Empire Strikes Back so we want to do it justice by designing this on Detolf Budget Scale. Preorders are open now! Perfect for your DX07 Luke Skywalker and the upcoming MMS452 Darth Vader Empire Strikes Back

1/6 Emperor Throne Room – Detolf Budget
Recreate the climax from the original trilogy in your Detolf with our small version of the Emperor Throne Room!

1/6 Death Star Diorama – Ultimate
The one that started it all, I can now offer a second run for this kit as our ultimate full Star Wars Death Star diorama (100cm x 51cm x 42cm), which has room for at least 8 figures. Designed to be the crown jewel, the center piece of your 1/6 scale collection.

1/6 Tantive IV Rebel Blockade Runner Service Corridor Diorama – Truscale
One of my personal favourites, to create the classic image of princess Leia in the service corridor of her Tantive IV Rebel Blockade Runner hiding the death star plans inside R2-D2. Made for our full scale display size to fit inside an IKEA BESTA, STUVA or similar. Made of solid machined and painted Aluminium.

1/6 Carbon Freezing Chamber Diorama – Detolf Deluxe
The first of the dioramas that is designed after it won the vote on Sideshowcollectors.com. The Carbon Freezing Chamber is part of the pivotal scenes at the end of Empire Strikes Back so we want to do it justice by designing this on Detolf Scale. We expect to be able to make first deliveries in June of 2018! Preorders are open now!
Read about the prototyping process here

1/6 TruScale Death Star Window with Animated 24 inch Display Screen for Ikea BESTA and STUVA
****. SOLD OUT ****
Imagine your Ikea Besta with Hot Toys Governor Tarkin, Princess Leia and/or Darth Vader with our Massive 24 inch Death Star Window, designed to fit in one of your Ikea Besta, Stuva or similarly sized Shelves, with an actual 24 inch high quality Samsung TV monitor, displaying the destruction of Alderaan. Or Maybe a Rogue One scene with the destruction of Jedda. Now it is possible with our Death Star Window TruScale Diorama. Don’t miss out, and order now.

1/6 Carbon Freezing Chamber Diorama – TruScale Accessory: The metal Ceiling Brushes
Add to the realism of your Jazzinc Dioramas TruScale Bespin Carbon Freezing Chamber as seen in Empire Strikes Back, These extendable brushes from Aluminium are the final touch in this 1/6 scale representation of the classic scene on Cloud City!

1/6 Avenge & Assemble Display Case
*** SOLD OUT ***
This is our latest product line, a light up display case, this one Marvel Avengers Themed, with the best price to space ratio. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop.

1/6 Emperor Throne Room – Detolf Deluxe
***SOLD OUT***
Be ready for the Star Wars Return of the Jedi Hot Toys Emperor Palpatine MMS467 or MMS468 and recreate the climax from the original trilogy in your Detolf with our Emperor Throne Room! There is also room for two Royal Guards MMS469, or even better, the Luke Skywalker MMS429 and Darth Vader MMS452 duelling!

1/6 Hoth Rebel Base Floor Pallets, weathered and covered in snow
As requested a limited run of these pallets has been made in sets of two. Fully painted and weathered.
Add this to your Star Wars Empire Strikes Back Figures Hot Toys for Hot Toys Princess Leia, Han Solo, Snowtroopers and more

1/6 Wall Mount Deluxe Death Star Display Case
*** SOLD OUT ***
This is our latest product line, a light up display case, this one Star Wars Death Star Themed, with the best price to space ratio. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop.

1/6 Tantive IV Rebel Blockade Runner Entry Way Diorama – Ultimate Edition
*** THIS ITEM HAS COMPLETELY SOLD OUT. AFTER THE END OF A RUN, WE WILL NOT MAKE ANY MORE. SORRY. CONGRATULATIONS TO THOSE WHO MANAGED TO GET ONE BEFORE THE STOCK WAS GONE. YOU HAVE AN EXTREMELY LIMITED EDITION PIECE THAT WILL ONLY APPRECIATE! ***
the Ultimate 1/6 scale diorama of the Tantive IV Rebel Blockade Runner Entry Way, designed to be the crown jewel of your collection. Made from precision CNC cut, bent and painted aluminium, perspex and Forex. At double the depth of our Truscale diorama at 80 cm deep, it is large enough to recreate the entire opening scene with rebels, stormtroopers and our favourite robots

EXPANSION KIT TO 1/6 Tantive IV Rebel Blockade Runner Entry Way Diorama – Ultimate Edition
*** SOLD OUT ***
UPGRADE KIT TO MAKE YOUR TRUSCALE ENTRY WAY DIORAMA INTO THE ULTIMATE 80CM DEEP VERSION
the Ultimate 1/6 scale diorama of the Tantive IV Rebel Blockade Runner Entry Way, designed to be the crown jewel of your collection. Made from precision CNC cut, bent and painted aluminium, perspex and Forex. At double the depth of our Truscale diorama at 80 cm deep, it is large enough to recreate the entire opening scene with rebels, stormtroopers and our favourite robots

1/6 Bounty Hunters for the Empire Themed Display Case
This is our latest product line, a light up display case, this one ISD Bountry Hunter Themed, with the best price to space ratio. It’s compatible with your Hot Toys Star Wars figures. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop.

1/6 Tantive IV Entry Way – Detolf Budget
***PERMANENTLY SOLD OUT!***
The perfect entry diorama at our lowest price yet. Perfect for recreating the scene with Darth Vader and Captain Antilles and many others.
Measurements: 39 x38 x29cm (15.3 x 15 x 11,4 inches)
DESIGNED TO FIT AN IKEA DETOLF DISPLAY CABINET OR STAND ALONE

1/6 Emperor Throne Room Themed Display Case
This is our latest product line, a light up display case, this one Emperor Throne Room Themed, with the best price to space ratio. It’s compatible with your Hot Toys and Sideshow Star Wars figures. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop. Perfect for your upcoming Hot Toys 1/6 MMS468 Star Wars Emperor Palpatine Figure!

1/6 scale DELUXE Detolf Emperor Throne
*** SOLD OUT ***
Be ready for the Star Wars Return of the Jedi Hot Toys Emperor Palpatine MMS467 or MMS468 and recreate the climax from the original trilogy in your Detolf with our version of the Emperor Throne! Pose it together with two Royal Guards MMS469, or even better, the Luke Skywalker MMS429 and Darth Vader MMS452 duelling!

1/6 Alien Nostromo Display Case
*** SOLD OUT ***
This is our latest product line, a light up display case, this one Alien Nostromo Themed, with the best price to space ratio. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop.

1/6 Episode VII TFA Themed Display Case
*** SOLD OUT ***
This is our latest product line, a light up display case, this one Star Wars TFA Themed, with the best price to space ratio. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop.

1/6 Guardians Display Case
*** SOLD OUT ***
This is our latest product line, a light up display case, this one Marvel Guardians of the Galaxy Themed, with the best price to space ratio. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop.

1/6 Man of Iron Themed Display Case
*** SOLD OUT ***
This is our latest product line, a light up display case, this one Iron Man Themed, with the best price to space ratio. It’s compatible with your Hot Toys Predator figures. Designed be wall mounted, it frees up valuable floor space, but it also puts all your figures at eye level. With the built in light box, and top figure lighting, this display makes your collection really pop.

1/6 Death Star Diorama – Deluxe Detolf V1
***PERMANENTLY SOLD OUT!***
Death Star deluxe diorama for 1/6 scale for Ikea Detolf or stand-alone presentation -SOLD OUT-

1/6 Death Star Diorama – Budget Detolf V1
Our budget Death Star V1 diorama is the detolf sized diorama that started it all. The batch has been completely sold out and everything we do is limited, so we won’t be making this one again.
-SOLD OUT-